How to detect SF6 gas leak? Weavers takes a look at SF6 leak detection considerations- SF6在线监测系统_SF6检漏仪_SF6传感器_SF6密度继电器

韦弗斯新闻动态

最新动态

SF6安全保障专家

专注于SF6气体检测的专业化

135 85763546

How to detect SF6 gas leak? Weavers takes a look at SF6 leak detection considerations

发布时间：2018-06-26 来源：ydlcb 浏览次数：39次

As mentioned in the previous article, SF6 gas leak detection, that is, sulfur hexafluoride gas leak detection, is an action closely related to personal safety. However, as a manufacturer of SF6 gas leak detection products in Shanghai, Weavers China does not recommend that you install SF6 leak detection products at will. How to detect SF6 gas leak? What is noteworthy about the use of sulfur hexafluoride gas leak detector?

First of all, the manufacturer of Weifers Shanghai SF6 gas leak detection products said that please ensure that before the sulfur hexafluoride leak detector is used, that is, before the startup, the operator is familiar with the operation of the SF6 leak detector, read the manual carefully, and strictly follow the on-off operation steps step by step. If you have no experience, you can ask the manufacturer for guidance during acceptance.

Before using the sulfur hexafluoride leak detector, pay attention to check the status of the instrument, because if the instrument is accidentally placed upside down during transportation, or the instrument vibrates violently, it may cause damage to the internal parts of the instrument and affect the use of the instrument.

Shanghai SF6 gas leak detector manufacturers said that when the sulfur hexafluoride leak detector is used, we should always pay attention to the maintenance and maintenance of the vacuum pump, and whether the solenoid valve is working normally, the sealing performance of the solenoid valve is stable, etc., because the solenoid valve can be called the heart of the leak detector, if there is a problem with the solenoid valve and vacuum pump, it will also affect the normal use of the leak detector. In addition, when the vacuum pump needs to change the oil, pay attention to the instrument power off, otherwise it is prone to electric shock accidents.

Weavers China suggests that once the probe of the SF6 gas leak detector has been adjusted, do not adjust it randomly, and only observe whether the self-calibration number of the instrument is normal to determine whether the sulfur hexafluoride leak detector is used normally.

Another point to note is that when the sulfur hexafluoride leak detector is used, it is necessary to ensure that the probe part is clean, and do not put the probe gun on the ground, which is easy to enter dust.

What should we pay attention to when using sulfur hexafluoride leak detector? The above is the summary of Weavers Shanghai SF6 gas leak detection product manufacturers, I hope to help you!