EN
上一条： 
沪公网安备31011802003762
-
-
Tel:13585763546 -
扫码咨询
-
-
TOP
韦弗斯新闻动态
最新动态
SF6安全保障专家
专注于SF6气体检测的专业化
How to set the monitoring unit number displayed on the host of SF6 integrated online monitoring system?
发布时间：2016-01-03
来源：ydlcb 浏览次数：36次
The host of the SF6 integrated online monitoring system produced by Winfoss is designed for the entire SF6 switch station, with SF6 concentration online monitoring and compatible with SF6 gas density online monitoring and SF6 gas micro-water online monitoring access.
SF6 integrated online monitoring system host display interface is 10.4 inch touch screen color display, on the touch screen display can be set according to the corresponding monitoring system. The system will transmit the data signal monitored by the monitoring unit to the monitoring host in 485 communication mode for analysis and processing, and the monitor will upload the monitored value of each monitoring unit after system analysis and calculation and display it on the main operating interface in the form of instrument number. The system can monitor 32 monitoring units at the same time. And display 32 bits corresponding to the monitoring unit number. In the monitoring unit (on each monitor (sensor) is set a dip switch, the dip switch digit on the dip switch can be placed in the corresponding digital position (the dip number is set in binary mode).