What must be done to maintain and maintain the SF6 gas recovery unit?- SF6在线监测系统_SF6检漏仪_SF6传感器_SF6密度继电器

韦弗斯新闻动态

最新动态

SF6安全保障专家

专注于SF6气体检测的专业化

135 85763546

What must be done to maintain and maintain the SF6 gas recovery unit?

发布时间：2016-11-20 来源：ydlcb 浏览次数：35次

What must be done to maintain and maintain the SF6 gas recovery unit?

(1) Correct use of SF6 gas recovery equipment, strictly abide by the operating procedures, prepare carefully before starting, check repeatedly during starting, properly handle after stopping, adjust well during operation, carefully implement the operating indicators, and do not run over temperature and overpressure;

(2) Careful maintenance, regular check whether the circuit connection of the equipment is loose, whether there is leakage phenomenon, careful inspection of the equipment, find problems, solve them in time, and eliminate hidden dangers. Clean, lubricate, tighten, adjust and protect equipment, keep parts, accessories and tools intact;

(3) Master the fault prevention, judgment and emergency treatment measures of SF6 gas recovery device equipment, and ensure that the safety protection device is easy to use;

(4) Do a good job of SF6 gas recovery equipment lubrication, regular refueling and lubrication of vacuum pumps and other equipment;

(5) The working time of the correct oil change of the vacuum pump does not exceed 150 hours.