What is the difference between SF6 qualitative leak detector and SF6 quantitative leak detector?- SF6在线监测系统_SF6检漏仪_SF6传感器_SF6密度继电器

韦弗斯新闻动态

最新动态

SF6安全保障专家

专注于SF6气体检测的专业化

135 85763546

What is the difference between SF6 qualitative leak detector and SF6 quantitative leak detector?

发布时间：2017-05-19 来源：ydlcb 浏览次数：40次

1) SF6 qualitative leak detector is mainly used to roughly detect SF6 gas leakage.

2) SF6 gas quantitative leak detector is suitable for the power supply department, installation and maintenance units and electric power test research institute, but also suitable for SF6 high-voltage switch factory as SF6 electrical equipment and export products supporting instruments testing.

Product features:

1) Small size, light weight, portable, hand-held snake probe, the connection increases the bending.

2) High sensitivity: super induction, response to fine halogen gas, can detect more than 3g gas leakage per year.

3) Wide measuring range: The instrument can detect the leakage of SF6 within the leakage rate range of the SF6 switching device, which can be switched between two levels.

4) High accuracy: The instrument adopts advanced calibration method to verify and give high accuracy calibration line, which improves the reliability of SF6 leak detection results and the accuracy of quantitative leak detection.

5) Intuitive display, sound and light alarm: digital liquid crystal, with backlight display, with simple and intuitive effect. When SF6 is present, the instrument emits an audible and visual alarm.

6) Fast reaction speed, short recovery time: The use of new circuit structure, the reaction speed of the instrument is accelerated, the recovery time is shortened, which greatly facilitates the field detection.

7) Long use time: the use time can be up to 5 hours, which is very suitable for on-site, SF6 high voltage switch factory and research institute.