How do I clean the SF6 gas recovery unit?- SF6在线监测系统_SF6检漏仪_SF6传感器_SF6密度继电器

韦弗斯新闻动态

最新动态

SF6安全保障专家

专注于SF6气体检测的专业化

135 85763546

How do I clean the SF6 gas recovery unit?

发布时间：2018-07-03 来源：ydlcb 浏览次数：31次

How to clean the SF6 gas recovery car?

Weavers SF6 recovery device manufacturer said that the more common SF6 gas recovery device is an orange-red car, which is equipped with vacuum pumps, purifiers and other components for recycling SF6 gas. In this article, take a look at the precautions for SF6 gas recovery vehicle cleaning with Weavers China!

Weavers China said that the SF6 gas recovery vehicle can complete the recovery and purification of SF6 gas in a fully enclosed situation, avoiding the possibility of SF6 gas leakage.

What are the steps for cleaning the SF6 gas recovery vehicle?

Weavers SF6 recovery device manufacturer said that when cleaning the SF6 gas recovery vehicle, it is necessary to remove the collective nozzle head and recovery device head, and then wash the inner wall of the recovery device with brass, and wash the internal residue. If you can't reach closer to the inside, Weavers China recommends wrapping a long wooden stick with waste cotton cloth and then using it to clean the inside, recommending that the cloth be changed frequently during cleaning.

In addition, SF6 gas recovery car cleaning can not forget the recovery device and nozzle cleaning, especially pay attention to the surface contact with these parts; The SF6 gas recovery vehicle surface can be cleaned only after the temperature of the SF6 recovery unit is lowered to 30-50 degrees Celsius.