How to use SF6 gas infrared quantitative detector- SF6在线监测系统_SF6检漏仪_SF6传感器_SF6密度继电器

韦弗斯新闻动态

最新动态

SF6安全保障专家

专注于SF6气体检测的专业化

135 85763546

How to use SF6 gas infrared quantitative detector

发布时间：2018-07-04 来源：ydlcb 浏览次数：33次

Weavers SF6 gas monitoring manufacturers said that SF6 gas is widely used in the power system, but once leaked into the air will produce harmful gases, it is because of this, the birth of a lot of SF6 gas monitoring instruments, one of which is SF6 gas infrared quantitative detector. So how do we use SF6 gas infrared quantitative detector?

In fact, the domestic and foreign research and development of SF6 gas monitoring technology has not stopped the pace, and the traditional SF6 leak alarm system has low monitoring limit, poor stability and other problems, so the birth of a more excellent SF6 gas infrared quantitative detector.

SF6 infrared quantitative gas detector uses gas infrared absorption detection technology, using a new thermonuclear and pyroelectric infrared detector and advanced fast electrically modulated diamond-like coating infrared light source, Wevers China said that such detectors use infrared light through the SF6 gas to be measured, these SF6 gas molecules on the specific wavelength of infrared light absorption principle, The concentration of SF6 gas can be detected, and the detected optical signal representing the concentration can be converted into electrical signals, data communication and other ways of output.

In addition, Weaver Shanghai SF6 gas monitoring manufacturer said that the SF6 infrared quantitative gas detector can also integrate oxygen sensors according to the actual needs of the substation environment, real-time detection of indoor oxygen concentration, to prevent staff from blindly entering the room due to gas leakage caused by cable trench cable sandwich and other low-lying narrow area operation caused by hypoxia security risks.

Wevers Shanghai SF6 gas monitoring manufacturers said that from the point of view of specificity, reliability and accuracy, SF6 infrared quantitative gas detectors will slowly occupy the SF6 gas monitoring market, and continue to expand the scope of application.