下载附件
立即咨询
上一条：
沪公网安备31011802003762
-
-
Tel:13585763546 -
扫码咨询
-
-
TOP
探索韦弗斯产品
SF6应用知识
SF6安全保障专家
专注于SF6气体检测的专业化
NDIR Infrared SF6 Gas Sensor Module (WFS-S1-S)
SF6 infrared sensor
Supported platform: Windows/Linux/Unlix
Software size: 10M
Brand: WINFOSS
Model: WFS-S1-S
Detection principle: Non-spectral infrared absorption detection (NDIR)
Detection range: 0~2000ppm (standard), other ranges can be customized
Detection accuracy: ≤± 2% FS 1
Operating temperature: -15 to 45 degrees Celsius
Response time: approximately 30 seconds (Td90, measured at 50%FS
产品详情/ Product details
NDIR infrared SF6 gas sensor module _SF6 infrared sensor (WFS-S1-S) based on dual-beam dual-wavelength infrared measurement technology and high-precision digital processing technology, is widely used in high voltage switch GIS room SF6 gas leak monitoring (0-100ppm). SF6 gas leak detector (0-50ppm) and SF6 purity analyzer (0-100%). Internal integrated complete automatic drift control and temperature compensation circuit.
NDIR Infrared SF6 Gas Sensor Module (WFS-S1-S)
SF6Infrared precision measurement, standard open communication protocol, easy for your secondary development; It is specially used in high voltage equipment in power industrySF6Precise detection of gas!
summarize
NDIR infrared SF6 gas sensor module (WFS-S1-S) based on dual-beam dual-wavelength infrared measurement technology and high-precision digital processing technology, is widely used in high voltage switch GIS room SF6 gas leak monitoring (0-100ppm). SF6 gas leak detector (0-50ppm) and SF6 purity analyzer (0-100%). Internal integrated complete automatic drift control and temperature compensation circuit.
NDIR infrared SF6 gas sensor module (WFS-S1-S) adopts dual beam non-spectral infrared (NDIR) detection technology, which is resistant to other gas interference, easy maintenance, good stability, and built-in temperature compensation. Standard Modbus ASCII protocol, digital output and analog output optional and other advantages. Suitable for SF6 leak alarm, on-site construction protection, single gas analysis, online monitoring, industrial process analysis and other applications.
Product characteristics
The unique light-free cell NDIR technology is equipped with a highly breathable stainless steel housing and can be connected to an external oxygen sensor with a digital signal output. Because it is designed for SF6 specific wavelength, it is resistant to other gas interference, does not require air pump pipeline, small size, strong corrosion resistant shell, easy to use and maintain, can upload and output sulfur hexafluoride content and oxygen content at the same time, and is suitable for leak alarm, environmental detection, online monitoring, gas composition analysis and other applications.
Advantages of the infrared SF6 sensor compared to the principles of electrochemistry and negative corona discharge:
l Infrared Spectral Absorption Principle (NDIR).
l Dual wavelength with temperature compensation.
l High reliability, no cross reaction with other gases.
l Compared with electrochemical sensors, sulfur hexafluoride sensor infrared sensor life of up to 10 years.
l High cost performance, affordable preferential prices.
l Compared with electrochemical sensors, sulfur hexafluoride sensors save after-sales maintenance costs.
l Digital and analog output mode is optional, convenient for secondary development and application.
l Micro structure, low power design.
l No radiation source, no secondary hazards.
Compared to the thermal conductivity principle, the NDIR infrared SF6 gas sensor module (WFS-S1-S) has the following advantages:
l Infrared SF6 purity sensor is small in size.
l Infrared SF6 purity sensor Low power consumption, battery powered.
l Infrared SF6 purity sensors do not require a large heating system.
l Infrared SF6 purity sensor operating temperature wide (-20-+60° C).
l More than 3 years of calibration cycle, no need to check the instrument frequently.
l High reliability and stability, no daily maintenance of SF6 purity analyzer.
Technical parameter
l Detection gas: sulfur hexafluoride (SF6).
l Detection principle: non-spectral infrared absorption detection (NDIR).
l Detection range: 0~2000ppm (standard), other ranges can be customized.
l Detection accuracy: ≤ ± 2 % FS 1.
l Operating temperature: -25 to 45 degrees Celsius.
l Working pressure: 950 to 1050 mbar.
l Ambient humidity: 0~95%RH.
l Preheating time: less than 2 minutes.
l Response time: approximately 30 seconds (Td90, measured at 50%FS).
l Working voltage: 5V.
l Working current: less than 200 MA.
l Output signal: UART, other forms can be customized.
l Auxiliary function: external ADC, can be connected to oxygen sensor.
l Service life: more than 6 years.
l Storage temperature: -25 to 55 degrees Celsius.
l Resolution: 1 ppm.
l Repeatability: ≤ ± 2 % FS 1.
l Linear error: ≤ ± 1 % FS 1.
l Lower detection limit: <10 ppm.
Pin specification
Serial number | name | Feature | Instructions | |
one | +5V | Power input | Voltage range4.9 V to 5.1 V | |
2 | TEN | Send enable | For controlRS485Chip transceiver | |
3 | RXD | Receiving end of the UART port | UART port with 5V logic level | |
4 | TXD | The sending end of the UART port | UART port with 5V logic level | |
5 | GND | Ground connection | ||
6 | Vout | Voltage output | 0.4~2V voltage output. Internal resistance of about 20K ohms, can be connected to an op amp or directly to the ADC chip, can not be used for power supply stream. | |
7 | GND | Ground connection | ||
Service guarantee
l Provides application circuitry, extended oxygen sensor circuitry, interface procedures and communication definitions.
l Provide detailed instructions and technical guidance in Chinese.
l One year warranty, lifelong spare parts support and maintenance.
l Hotline 365 days to answer the user's consultation.